Vibration measurement at the control points, spectrum decomposition and identification of defect frequencies.
Comparison with previous measurements and with the limits set by ISO 10816/20816.
Findings for each machine: bearings, alignment, balancing, mountings.
Recommendations on repair timing and how often to repeat the measurements.
Fleet composition, operating modes, failure history and previous measurements.
Machines are surveyed under working conditions, with no production stoppage.
Spectra are processed and compared with the standards and with operating-hours trends.
Findings with a diagnosis and recommendations for every component.
We run regular vibration monitoring of turbine units at our clients’ working facilities, including remote fields. Our reports are accepted by chief mechanical engineering departments and by supervisory authorities.
No, measurements are taken under working conditions. A shutdown is only needed if critical defects are found that call for immediate action.
For basic monitoring, every 3 to 6 months, depending on the operating regime and how critical the machine is. After the first survey we will propose a schedule tailored to your fleet.
Values and spectra for each control point, comparison with ISO limits and with previous measurements, a diagnosis by component and recommendations with timescales.
We reply in Telegram during working hours, Moscow time.
Telegramchat with a manager +7 (812) 944-68-50call the office Request a quoteattach your specification
